Water Leak Detection (WLD)
HORNET INFOTECH provides comprehensive engineering, turnkey supply, installation, testing, and lifecycle support for early detection of water leakage and unwanted liquid ingress around critical IT equipment, raised computer floors, cooling infrastructure, and protected technical spaces.
Liquid Ingress Sensing & Environmental Protection
Unnoticed water leakage from chiller pipes, precision cooling unit condensate drains, or overhead plumbing poses catastrophic short-circuit and corrosion risks to live electrical infrastructure. Our engineered water leak detection systems detect unwanted liquid ingress immediately, pinpointing fault zones to facilitate swift remedial action.
High-durability conductive polymer sensing cables, fast-drying non-conductive polymer construction, spot probe sensors for localized drip pans, zone-based detection loops, and distance-accuracy location identification where supported by controller hardware.
Engineered perimeter and subfloor layouts beneath raised flooring, data centre equipment aisles, UPS and transformer rooms, CRAH/CRAC precision cooling drain pans, mechanical plant headers, and overhead pipe risers.
Local audible sounders and LED zone status indicators, cable continuity break supervision, remote email/SMS event triggers, and high-level Modbus RTU or BACnet/IP integration into centralized BMS and DCIM platforms.
Sensing cable route audits, simulated liquid contact functional testing, controller loop impedance verification, as-built zone map updates, and scheduled preventive maintenance inspections under comprehensive AMC contracts.
7-Stage Water Leak Detection Ecosystem
From conductive sensing cables under raised floors to intelligent zone controllers, continuous cable integrity supervision, and automated BMS shutoff interlocks, each layer provides robust environmental safeguarding.
Leak Sensors
Fast-drying conductive polymer sensing cables and spot probe sensors installed along high-risk fluid paths and condensate drip pans.
Sensing Cable / Zones
Engineered continuous cable routing beneath raised floors, around computer room air conditioners (CRAC), and along chiller pipework headers.
Zone Controller
Microprocessor-based leak detection control units providing continuous circuit continuity supervision and cable fault/break monitoring.
Location Identification
Distance-reading precision electronics that calculate resistance shifts along sensing cables to display exact leak location where supported.
Alarm Processing
Multi-stage alarm escalation, local audible sounders, visual strobe activation, and fail-safe fault status reporting.
Monitoring / Notification
Remote notification via dry-contact relay outputs, SMS/email gateway triggers, and real-time integration into centralized security consoles.
BMS / Incident Response
High-level Modbus/BACnet interfaces to enterprise BMS platforms and automated interlocks to isolate motorized water supply valves.
Operational Environments & Facility Profiles
Water leak detection engineering adapts cable layouts, sensor density, distance-location controllers, and BMS integration to the specific mechanical and architectural profiles of high-risk facilities.
Data Centres & Server Rooms
Subfloor spaces beneath raised tiles, CRAH/CRAC unit condensation drains, chilled water loops, and perimeter cable trays vulnerable to liquid damage.
IT / Telecom Facilities
Switching rooms, cellular base station shelters, and edge telecom nodes where unmonitored water ingress threatens continuous telecommunications connectivity.
UPS & Electrical Rooms
Main switchboards, transformer substations, UPS battery racks, and electrical risers where moisture ingress presents severe flashover and short-circuit risks.
Control Rooms / SOC / NOC
Continuous operations centres, technical console floors, and command desks where liquid intrusion could compromise uninterrupted operational supervision.
Commercial Buildings
Corporate office basements, lift pits, executive restrooms, MEP plant rooms, and luxury tenant utility risers requiring early flood warnings.
Banking & Financial Institutions
Central cash vaults, core transaction processing rooms, and electrical risers protected by perimeter sensing cables and point probes.
Industrial / Manufacturing Facilities
Process automation control rooms, clean laboratories, fluid cooling circuits, and chemical storage perimeters demanding reliable liquid boundary detection.
Detailed WLD Specifications & Engineering Design Review
HORNET INFOTECH provides comprehensive protected-area surveys, sensing cable layout schematics, and vendor-neutral technical BOQ formulation tailored to liquid ingress and environmental monitoring requirements.
• Detection architectures (zone-based vs. pinpoint distance-locating) depend on controller specifications, cable length budgets, and project design parameters.
• Integration with motorized shutoff valves, BMS supervisors, and alarm consoles is project-specific and subject to engineered design requirements.
Documented Project Deployments
Verified enterprise and institutional infrastructure deployments demonstrating HORNET INFOTECH's turnkey delivery.
AL-Karim University Campus ICT & ELV Infrastructure
Turnkey campus-wide ELV and ICT infrastructure across the 55-acre AL-Karim University campus in Katihar, Bihar, encompassing approximately 450–500 km of structured cabling, 35 km fibre infrastructure, 1,800+ data points, 1,000+ wireless access points, 500+ IP telephony endpoints, 8 flap barriers, data centre setup, AV conferencing, and environmental detection systems (VESDA, water leak detection, rodent detection).
eClerx Corporate Facility ELV & ICT Infrastructure (Phase 1)
Integrated ELV, electronic security, life safety, and network cabling infrastructure deployed for eClerx Chandigarh (Phase 1), supporting 216 CCTV surveillance cameras, a 340-device addressable fire alarm system, 170 PA speakers/units, 30 access-controlled doors, 1,500+ structured cabling data points, Novec clean-agent suppression, VESDA, WLD, and rodent detection.
eClerx Corporate Facility ELV & ICT Infrastructure (Phase 2)
Integrated ELV, electronic security, life safety, and network cabling infrastructure deployed for eClerx Chandigarh (Phase 2), supporting 178 CCTV surveillance cameras, a 215-device addressable fire alarm system, 120 PA speakers/units, 23 access-controlled doors, 1,000+ structured cabling data points, Novec clean-agent suppression, VESDA, WLD, and rodent detection.
Related Critical Room & Facility Solutions
Aspirating smoke detection systems delivering very early warning against smoldering electrical fires in critical server and telecom facilities.
Precision server halls, raised computer floors, and CRAH/PAC perimeter zones requiring continuous conductive liquid intrusion monitoring.
Mission-critical battery rooms and electrical distribution suites protected against condensate leakage and overhead pipe failure.
Centralized supervisory monitoring, automated solenoid valve shutoff triggering, and alarm routing via Modbus RTU or BACnet/IP protocols.
Total critical room protection coordinating gaseous fire extinguishing and subfloor water leak detection in high-value IT spaces.